Gold Coast Sprinkler And Pumping Centre is proud to be able to provide patio drip irigation kits, sprinkler systems, agricultural irrigation, sprinklers, water pumps, dirty water pumps, ponds, fountains, water tanks, sprinkler system design, hunter irrigation products.
For a more complete list of products please visit the products pages found here, or utilise the provided links below. |
|
Hunter Wireless Valve System
Description:
Rugged, reliable, multi-station, multi-function, battery powered controller and programmer.
Traffic medians, roundabouts, rural properties, construction sites, municipal parks are all places that
lack standard electric power. The Wireless Valve System allows all these areas the benefits of automatic
irrigation. There is no need to reach inside the valve box to hook up a field transmitter and download
program instructions; the programmer can communicate with the controller from as far as 30m away.
The control unit is fully submersible and waterproof up to 3.5m, making the unit rugged enough to take
on whatever water mud and debris might be found in a valve box environment.
Features:
- Wireless, radio-controlled operation up to 30m away:
Perform system checks, programming without direct access to
the controller.
- Latching solenoid design for minimal power consumption:
9 Volt battery guaranteed to last longer than one full season.
- Fully submersible and waterproof to 3.5m.
No moisture intrusion, even in humid valve box environments.
- Each valve set up with own start time, run time and day
schedule.
Plant types with difference requirements receive the exact
watering they need.
- Controller attaches out of sight in valve box:
The ultimate in vandal-resistance.
- Double-sealed battery compartment:
'
O'ring seal near threads, second seal inside cap withstand
water intrusion.
- Weather sensor compatible:
Accomodates Hunter Mini-Clik®, Rain-Clik™ and Freeze-
Clik® sensors.
Specifications:
- Station run time: 0-240 minutes in 1 minute increments.
- Start times: 9 per day.
- 7-day calendar or interval (1-31 day) watering.
- AM/PM or 24-hour clock option.
- Start time stacking.
- Simplified manual operation.
- Programmable rain delay for 1-7 days.
- Compatible with most common 2-wire 6-9 Volt DC battery operated solenoids.
- Battery: Standard 9 volt alkaline battery (not included). Battery not required for program backup.
- Memory: non-volatile for program data.
- Frequency: 900MHz ISM Band.
Hunter SVC Smart Valve Controller
Description:
Reliable battery–powered control without the need of electric connection. For isolated sites or
power-restricted areas and for the special needs of drip zones, Hunter provides the ideal economical
answer. The SVC mounts to a valve solenoid quickly and easily – without screws, drills
or additional wires – and the unit's solid contruction ensures it can handle the harsh environment
of a valve box.
Features:
- User-friendly programming:
Same easy-to-use programming style as all Hunter controllers.
- Latching solenoid design for minimum power consumption:
Uses 9 volt battery.
- Fully submersible and waterproof to 3.5m:
No moisture intrusion, even in humid valve box environments.
- Irrigate landscapes in remote Locations:
Helps reduce system installation costs.
- Flexible Programming Options:
Choice of days-of-the-week or 31-day interval scheduling.
- Sealed battery compartment:
Customized design features resin-sealed electrical
componants that withstand water intrusion.
- Weather sensor compatible:
Accomodates Hunter Mini-Clik®, Rain-Clik™ and
Freeze-Clik® sensors.
Specifications:
- Station run time: 0-240 minutes in 1 minute increments.
- Start times: 9 per day.
- 7-day calendar or interval (1-31 day) watering.
- AM/PM or 24-hour clock option.
- Easy to understand icon-based display.
- Simplified one button manual operation.
- Programmable rain delay for 1 to 7 days.
- Operates valves up to 30m away from controller.
- 1/2m of pre-wired cable included (for programming outside the valve box).
- Clip bracket for simple installation.
- Rubber cover prevents dirt and debris from accumulating on the display.
Galcon “Galuni” Universal
Battery Operated Control Module
Application
Battery operated control module used on standard threaded (bonnet) valves.
Features:
- Independant station programming single station.
- Up to 4 start times.
- Watering time from 1 minute to 12 hours.
- Irrigation schedule - 7 day calendar or interval from 1 - 30 days.
- Controller is powered by one 9 volt alkaline battery (optional).
- Rain off position.
Weather proof.
- Specifications:
- Pressure range: 70kPa - 800kPa
- Max temperature: 80ºC
- Batteries: one 9V alkaline battery (optional)
- Suits HR Products valves, Orbit valves, Richdel valves, check for other brands.
Galcon 7001D Series
Programmable Valve
Application:
Battery operated valve used watering lawns, garden beds and areas
where A.C. power is not present.
Features:
- Independent station programming single station.
- Up to 4 start times.
- Watering time from 1 minute to 12 hours.
- Irrigation schedule – 7 day calendar or interval from 1 – 30 days.
- Controller is powered by one 9 Volt alkaline battery (optional).
- Rain off position.
- Weather proof.
- 25mm valve with actuator and valve mount controller.
- Manual overide.
Technical Specifications:
- 25mm Female Inlet/Outlet
- Standard: ISO NP 10 ANSI Class 125.
- Body and Bonnet: Fibreglass reinforced Nylon.
- Spring: Stainless steel SAE 302.
- Diaphragm: Natural Rubber.
- Gaskets: Buna N.
- Pressure Range: 70kPa – 800kPa.
- Max. Temperature: 80°C.
- Batteries: One 9V alkaline battery.
- Max. 100 lpm.
Galcon DC1 & DC4
Application:
Battery operated controller used to control
Galcon DCV-25 actuators for watering lawns
and garden beds.
Features:
- Indenpendent station programming, single
station (DC1) and 4 stations (DC4).
- Up to 4 start times per station.
- Watering time from 1 minute to 12 hours.
- Irrigation schedule – 7 day calendar or interval
from 1 to 30 days.
- Controller is powered by two 9 volt akaline
batteries.
- Rain off position.
- Water Resistant.
- Operating pressure range 70kPa – 1000kPa.
- DC1 supplied with 1 DVC-25mm.
- DC4 requires 4 DCV-25mm.
- Maximum flow through DVC-25mm,
160LPM*
* Check velocity in pipe work may exceed
industry standard for safe irrigation practices.
Galcon DC6 & DC12S
Application:
Battery operated controller used to control
Galcon DCV-25mm actuators for watering
lawns and garden beds.
Features:
- Operation of 6 to 12 valves plus a master
valve (or pump using latching relay, optional
extra).
- Separate irigation schedule programmable
for each valve.
- Up to 4 irrigation activations per day per
valve in programmable weekly schedule
mode.
- Programmable weekly/cyclical irrigation
schedules.
- Irrigation window in cyclical program mode
(Loop mode).
- Irrigation duration: 1 second to 12 hours.
- Irrigation frequency from once every minute
to once every 30 days in cyclical program.
- Manual operation of individual valves.
- Sequential manual operation of all valves.
- Operation of valves up to 50 metres from
the controller.
Main Features Specific to DC12S
- Weather resistant.
- Operated by four 9V alkaline batteries.
- Operates Galcon DCV-25mm only.
Main Features Specific to DC6
- Weather resistant.
- Operated by two 9V alkaline batteries.
- Operates Galcon DCV-25mm only.
Galcon 2010 Series
Application:
Battery operated valve used for
watering lawns, garden beds and
areas where A.C. power is not
present.
Features:
- Battery powered 2 x 9 Volt
Alkaline.
- A 'Watering Time' selector sets
the required watering period 5
minutes – 12 hours.
- A 'Watering Cycle' selector
sets the required watering cycle
every 45 minutes – every 14
days.
- Set a delay start time for early
morning.
- Can be manually, semi–automatically
or automatically
operated.
- Can be set to irrigate once only.
- Pressure range 70kPa – 1000kPa.
- Maximum flow through valve
160LPM, 2010EZ25.
- Maximum flow through valve
583LPM, 2010EZ40.
- Maximum flow through valve 666LPM 2010EZ50.
- maximum Temperature 30°C
Galcon 9001D Series
Application:
Battery operated hose tap timer.
Features:
- Individual Day Programming:
- Can be set to water on specifica days.
- Irrigation Duration from 1 minute to 12
hours.
- Up to four start times per day.
- Electronic manual operation via the controller.
- Rain off suspension option.
- Low battery indicator.
- Internal filter installed in the controller.
- Operated by a 9V alkaline battery.
- Battery lasts up to one season (Pending site
and operating modes.).
Technical Specifications:
- Controller body – ABS
- LCD Display.
- Seals –EPDM.
- Standard – CE.
- Battery – 9V alkaline (optional extra).
- Maximum capacity 23LPM.
- Working pressure range – 100 – 1000kPa
WaterMaster Twin Dial Tap Timer
Applications:
All 25 and 20mm garden taps.
Features:
- Easy to install to any outdoor garden tap.
- Battery operated automatic water timer and valve combination (2 x 9V alkaline).
- Standard 20mm BSP thread connections.
- Water resistant design.
- Up to 4 start times per day.
- Waters up to 6 hours per start time.
- Set daily, 2nd or 3rd day watering
intervals.
- 'Manual on' feature for quick temporary
watering.
- High Quality diaphragm valve.
- Latching solenoid uses very little power to
open and close the valve.
- Uses two 9V alkaline batteries (not
included).
- Battery operated automatic water timer and valve combination.
- Ten watering interval options with durations from 2 minutes to 2 hours.
- Timer cover provides protection from sun and rain (not weather proof).
Electrical Requirements:
- 2 x 9V Batteries.
Operating Range:
- 68 – 500kPa
- 2°C – 43°C
|
|