Gold Coast Sprinkler And Pumping Centre is proud to be able to provide patio drip irigation kits, sprinkler systems, agricultural irrigation, sprinklers, water pumps, dirty water pumps, ponds, fountains, water tanks, sprinkler system design, hunter irrigation products.
For a more complete list of products please visit the products pages found here, or utilise the provided links below. |
|
Mazzei Injectors
Description:
Mazzei Injectors (patented) are extremely efficient, compact differential injection devices. Currently
operating successfully in thousands of installations worldwide, Mazzei Injectors offer a reliable, accurate,
and economical method to inject virtually any liquid or gas substance into a pressurized fluid stream.
Application:
The highly versatile Mazzei Injectors are suitable for a wide
variety of applications.
Agriculture
- Ag Irrigation Systems - to inject fertilizers and other chemicals or
water treatment additives.
- Ag Spray Systems - for mixing and/or the transfer of concentrated
pesticide materials.
- Food Processing - for water chlorination, injection of detergents,
bacterial agents, other water treatment purification additives.
Home and Garden
- Irrigation Systems - for application of liquid fertilizer through landscape sprinkler or drip irrigation
systems, hose end sprinklers and/or spray nozzles. (Check Local codes)
Industrial/Commercial
- Water Treatment - to inject air, liquids, gases (ozone), and other water purification chemicals for cooling
tower or other water or fluid recirculatory systems, waste water systems, potable water systems.
- Washing & Cleaning - to inject detergents, solvents, and other cleaning agents into carpet cleaning
equipment, car wash systems, dishwashing equipment and other industrial cleaning processes.
Features
- Molded from high quality thermoplastics with superior strength, high temperature capability, resistant to
most chemicals.
- No moving parts, low-maintenance trouble-free operation.
- Unique design allows maximumcavitation in the injection chamber, thereby providing instantaneous
mixing
- Ideally suited for continuous mixing functions, require no secondary blending devices.
- Initial cost and installation cost are low
- Powered by the motive fluid, no external energy required for most instllations.
- Available in a broad range of sizes, flows and injection capacities.
Dosatron DI45
Fertilizer Injector
Application
Used to inject liquid chlorine in greenhouse, open field and landscape watering systems.
Features
- Can be installed directly on main line (check user guide)Dose of concentrate always proportional to volume of water entering dispenser
- No power needed
- Uses hydraulics from irrigation system
- No waste water
Specifications
- Body - poly acetal
- Dosing stem - Polypropylene and polythylene
- Piston - polyanide, nitrile, polyacetate, polypropylene
- Seals - motor viton, dosage seal viton
- Inlet/outlet 32mm BSP male
- Built in protection filter 50 mesh stainless steel
- Maximum operting temperature 40ºC
- Maximum head loss 140kPa at max flow rate
- Maximum suction height 4 metres
- Practical operating flow 10L/hr - 2500L/hr through injector
- Operating pressure 50 - 500kPa
- Maximum injected solution at 100Lph - 1.5L/h
- Maximum injected solution at 4500Lph - 67L/h
- Adjustable dosage 0.2% to 1.5%
Dosatron DI150
Fertilizer Injector
Application
Used to inject to inject soluble or liquid fertilizer in greenhouse,
open field and landscape watering systems.
Features
- Can be installed directly on main line (check user guide)
- Dose of concentrate always proportional to volume of water
entering dispenser
- No power needed
- Uses hydraulics from irrigation system
- No waste water
Specifications
- Body - Delrin
- Dosing stem - Polypropylene and polythylene
- Piston - polyurethane, nylon, nitrile, delrin
- Built in protection filter 50 mesh stainless steel
- Maximum operting temperature 40ºC
- Maximum head loss 140kPa at max flow rate
- Maximum suction height 4 metres
- Practical operating flow 10L/hr - 2500L/hr through injector
- Operating pressure 30 - 600kPa
- Maximum injected solution at 10Lph - 0.5L/h
- Maximum injected solution at 2500Lph - 125L/h
- Adjustable dosage 1% to 5%
Dosatron D8R150
Fertilizer Injector
Application
Used to inject to inject soluble or liquid fertilizer in greenhouse,
open field and landscape watering systems.
Features
- Can be installed directly on main line (check user guide)
- Dose of concentrate always proportional to volume of water
entering dispenser
- No power needed
- Uses hydraulics from irrigation system
- No waste water
Specifications
- Body - Delrin
- Dosing stem - Polypropylene and polythylene
- Piston - polyurethane, nylon, nitrile, delrin
- Built in protection filter 32 mesh stainless steel
- Maximum operting temperature 40ºC
- Maximum head loss 70kPa at max flow rate
- Maximum suction height 4 metres
- Practical operating flow 5000-8000Lph through injector
- Operating pressure 150-800kPa
- Maximum injected solution at 500L/h - 25L
- Maximum injected solution at 8000L/h - 400L
- Adjustable dosage 1% to 5%
- Inlet/outlet 50mm metric poly
Dosatron D8R
Fertilizer Injector
Application
Used to inject soluble or liquid fertilizer in greenhouse, open field
and landsacpe watering systems.
Features
- Can be installed directly on main line (Check user guide)
- Dose of concentrate always proportional to volume of water entering dispenser
- No power needed
- Uses hydraulics from irrigation system
- No waste water
Specifications:
- Body - Delrin
- Dosing stem - Polypropylene and polyethylene
- Piston - Polyurethane, nylon, nitrile, delrin
- Built in protection filter 32 mesh stainless steel
- Maximum operating temperature 40ºC
- Maximum head loss 70kPa at max flow rate
- Maximum suction height 4 metres
- Practical operating flow 5000-8000LPH through injector
- Operating pressure 150-800kPa
- Maximum injected solution at 500L/H - 10L
- Maximum injected solution at 8000L/H - 160L
- Adjustable dosage 0.2% to 2%
- Inlet/outlet 50mm metric poly
Dosatron D8R
Fertilizer Injector
Application
Used to inject soluble or liquid fertilizer in greenhouse, open field
and landsacpe watering systems.
Features
- Can be installed directly on main line (Check user guide)
- Dose of concentrate always proportional to volume of water
entering dispenser
- No power needed
- Uses hydraulics from irrigation system
- No waste water
Specifications:
- Body - Delrin
- Dosing stem - Polypropylene and polyethylene
- Piston - Polyurethane, nylon, nitrile, delrin
- Built in protection filter 32 mesh stainless steel
- Maximum operating temperature 40ºC
- Maximum head loss 70kPa at max flow rate
- Maximum suction height 4 metres
- Practical operating flow 5000-8000LPH through injector
- Operating pressure 150-800kPa
- Maximum injected solution at 500L/H - 10L
- Maximum injected solution at 8000L/H - 160L
- Adjustable dosage 0.2% to 2%
- Inlet/outlet 50mm metric poly
Dosatron DI16
Fertilizer Injector
Application
Used to inject soluble or liquid fertilizer in greenhouse, open
field and landsacpe watering systems.
Features
- Can be installed directly on main line (Check user guide)
- Dose of concentrate always proportional to volume of water
entering dispenser
- No power needed
- Uses hydraulics from irrigation system
- No waste water
- Low pressure flow operstion
Specifications:
- Body - Delrin
- Dosing stem - Polypropylene and polyethylene
- Piston - Polyurethane, nylon, nitrile, delrin
- Built in protection filter 50 mesh
- Maximum operating temperature 40°C
- Maximum head loss 140kPa at max flow rate
- Maximum suction height 4 metres
- Practical operating flow 10L/Hr-2500L/Hr through injector
- Operating pressure 30-600kPa
- Maximum injected solution at 10L/hr 0.02L/Hr
- Maximum injected solution at 2500L/hr 40L/Hr
- Adjustable dosage 0.2% to 1.6%
- Inlet/outlet 20mm BSP male
Venturi Fertilizer Injector Kit
Application
Used to inject soluble or liquid fertilizer in greenhouse, open field and landscape watering systems.
(Check local codes for backflow prevention laws.)
Features
- Kit includes:
- Venturi.
- Built in sight glass flow indicator.
- Control valve to throttle amount of fertilizer.
- 1m of suction tube
- Screen
Specifications:
- Body - Polypropylene for resistance to acids and other
chemicals.
- Maximum working pressure 785kPa
- Minimum working pressure on pressurized systems must be 98kPa.
- When using on by pass pressure differential between the
inlet and outlet must be at least 70kPa.
- Venturi should always be installed on level plain.
|
|
