Gold Coast Sprinkler And Pumping Centre is proud to be able to provide patio drip irigation kits, sprinkler systems, agricultural irrigation, sprinklers, water pumps, dirty water pumps, ponds, fountains, water tanks, sprinkler system design, hunter irrigation products.
For a more complete list of products please visit the products pages found here, or utilise the provided links below. |
|
Poly Fittings And Tapping Bands
Tavlit Swivel Fittings
Application:
Used to allow simple manifolding of solenoid valves into irrigation manifolds. Assembles and dismantles easily for maintenance.
Specifications:
- Body & gasket: Poly Propylene
- Gasket: EPDM
- Max working pressure: 1000 kPa
- Threads: BSP
'O' Ring Seal - Tavlit Threaded Fittings - Self Seal
Application:
High Quality Poly Propylene fittings for irrigation.
Specifications:
- Material: Poly Propylene
- Thread: BSP
- Max working pressure: 1600 kPa @ 20°C
- Max working temperature: 100°C
- 'O' ring seal NBR
- 15-50mm sizes available
- 'O' ring seal on male and female ends of fittings
Tavlit Hex Nipples |
Tavlit Hex Nipples - Reducing |
Tavlit Hex Reducing Bushes - M/F |
|
|
|
|
Tavlit Couplings - Reducing |
Tavlit Couplings |
|
|
|
Tavlit 90° Elbows M/F |
Tavlit 90° Elbows |
Tavlit Adaptors |
|
|
|
Tavlit Tees |
Tavlit Caps |
Tavlit Plugs |
|
|
|
RX Plastics - Threaded Fittings
Application:
 Complete range of threaded fittings used on all irrigation pipe work systems.
Specifications:
- No corrosion risk
- UV Stable
- Working pressure to 1600kPa
- BSP and BSPT Threads
- Sizes 15-50mm
- Nipples & sockets
- Bushes, female tees and elbows.
- Male elbows, hex plugs
- Hose tails, backnuts and caps
- Tank male inlets, tank fittings
- Materials of construction: nylon and polypropylene
Rural Saddles
Application:
Rural tapping band designed to be fitted onto rural size poly pipe.
Description:
- Poly rural pipe,
- Ideal for use in narrow trenches,
- Single bolt system for easy installation,
- Cuts installation time in half.
Specifications:
- Body - two halves hinged together on one side with a single bolt clamping the
other side together. Made from engineering grade Acetal designed for long
term performance.
- Bolts - zinc plated or stainless steel (option extra).
- Seal - resilient seat sealing “O”ring made from nitrile rubber.
- Maximum working pressure of 800Kpa.
Alprene Transition Fittings
 Application:
Transition fitting from metal to plastic for all water pipe networks.
Specifications:
- Operating pressure PN16 (1600kPa)Male/female threads are made of nickled brass and manufactured to gas thread standard.
- Metal inserts have nut for tightening
- Suitable for use with potable water
- Body nut and thrust ring made from virgin polypropylene
UV stabilised
- Clamp ring - acetalic resin
- Body colour black
- Australian standard AS 4129
- Metal threads - conical
- Female threads - cylindrical
Alprene Rural Fittings
 Application:
Transition fitting from metal to plastic for all water pipe networks.
Specifications:
- Operating pressure PN16 (1600kPa)
- Male/female threads are made of nickled brass and manufactured
to gas thread standard.
- Metal inserts have nut for tightening
- Suitable for use with potable water
- Body nut and thrust ring made from virgin polypropylene
UV stabilised
- Clamp ring - acetalic resin
- Body colour black
- Australian standard AS 4129
- Metal threads - conical
- Female threads - cylindrical
Certificates: Australia (Rural AS 2698-2)
Selection of 12 types from ¾" to 2"
Rural to Metric Fitting Conversion Kits available.
Alprene Compression Fittings
 Application:
Complete range of compression fittings allows assembly on metric
polyethylene pipes. Disassembly not required for all sizes. All
components work together smoothly to guarantee a reliable and
efficient joint.
Specifications:
- Body, Nut, thrust ring: virgin polypropylene in master batches,
UV stabilized.
- Clamp ring: Acetalic resin
- Gaskets: Food safe rubber (NBR)
- Reinforcement ring: stainless steel AISI 430
- Colour Body: Black
- Colour Nut: Blue (150year life)
- Taper male thread (pressure tight)
- Parallel female thread (pressure tight)
- Maximum pressure:
- -20oC +20oC 15 - 63mm 1600kPa
- -20oC +20oC 75 - 110mm 1000kPa
Certificates: Australia (AS 4129)
Selection of 18 types from 15mm to 110mm
Alprene Metric Tapping Saddles
Application:
Pressure  metric poly pipe networks carrying water. Sizing from
25mm through 315mm
Specifications:
- Body - Virgin polypropylene, UV stabilised
- Caskets - NBR (Food safe rubber)
- Reinforcement rings - stainless steel
- Bolts & Nuts - Galvanised (Optional stainless steel)
- All pressure pipe type PE to AS/NZ 4130
- Test standards AS/NZ 4129
- Thread standards AS 1722
Alprene Flanged Joint with Metal Flange Ring
 Application:
Connecting metric poly pipe to flanged face pipework.
Specifications:
- Body, Nut, thrust ring: virgin polypropylene in master batches.
- Clamp ring: Acetalic resin
- Gaskets: Food safe rubber (NBR)
- Reinforcement ring stainless steel AISI 430
- Colour
- Flange table D
- Temperature:
- -20oC - +20oC 50 - 63mm 1600kPa
- -20oC - +20oC 75 - 110mm 1000kPa
- Australian Standard AS 4129
Alprene A16 Compression Fittings Kits
| Reducing Kit - For Metric Poly Fittings |
25mm x 20mm Poly Reducing Kit |
KITR02520 |
 |
32mm x 20mm Poly Reducing Kit |
KITR03220 |
| 32mm x 25mm Poly Reducing Kit |
KITR03225 |
| 40mm x 20mm Poly Reducing Kit |
KITR04020 |
| 40mm x 25mm Poly Reducing Kit |
KITR04025 |
| 40mm x 32mm Poly Reducing Kit |
KITR04032 |
| 50mm x 25mm Poly Reducing Kit |
KITR05025 |
| Adaptor Kit - Alprene to Copper Pipe |
50mm x 32mm Poly Reducing Kit |
KITR05032 |
 |
50mm x 40mm Poly Reducing Kit |
KITR05040 |
| 63mm x 25mm Poly Reducing Kit |
KITR06325 |
| 63mm x 32mm Poly Reducing Kit |
KITR06332 |
| 63mm x 40mm Poly Reducing Kit |
KITR06340 |
| 63mm x 50mm Poly Reducing Kit |
KITR06350 |
| |
|
| 20mm x 15mm Copper Pipe Adaptor |
KITCU02013 |
| 25mm x 22mm Copper Pipe Adaptor |
KITCU02522 |
| 32mm x 25mm Copper Pipe Adaptor |
KITCU03225 |
4N Tapping Bands
Applications:
Pressure UPVC pipe networks carrying water.
Description:
 High pressure water tapping bands designed to replace metal fittings in buried irrigation
pipe networks, noryl tapping bands provide the same resistance to physical abuse while
guaranteeing a permanent resistance to corrosion.
Specifications:
- Body – two bands bolted together to form a clamp around the pipe. Halves constructed
NORYL GTX 820 resin (20% glass filled). Noryl is a blend of polystyrene and poly
phenylene oxide which is noted for its rigidity, heat resistance, good electrical and
chemical resistance with strong dimensional stability.
- Stainless steel nuts, bolts and washers (10mm)
- Seal – resilient seat sealing ring 'E' lip nitrile rubber.
- Pressure class PN16 (1600kpa)
|
|
