Gold Coast Sprinkler And Pumping Centre is proud to be able to provide patio drip irigation kits, sprinkler systems, agricultural irrigation, sprinklers, water pumps, dirty water pumps, ponds, fountains, water tanks, sprinkler system design, hunter irrigation products.
For a more complete list of products please visit the products pages found here, or utilise the provided links below. |
|
HR Products CL18 PVC Fittings
Application
Complete range of PVC fittings used in all irrigation watering
systems and fresh water piping networks.
Specifications:
- Australian Standard AS 1477 CL18
- Material : 100% virgin
- Polyvinyl Chloride (PVC) 83.3% no less
- Titanium Dioxide (TiO2) 1.5 parts per hundred mass
- Vinyl Chloride Monomer content: 1mg/kg less than
Typical Properties:
| |
Specific Gravity
Izod Impact Strength
Tensile Strength
Elongation @ Break
Heat Stability @ 190°C
Vicat Softening Point |
ASTM D-792
ASTM D-256
ASTM D-638
ASTM D-638
BS 2782
ASTM D-152s |
1.44 g/cm²
7kgf/cm
490 kgf/cm²
115%
50min
91°C |
Selection of 13 Categories
See HR Products Price list for sizes and codes
Not for use with compressed air or gases
Spears Schedule 40 PVC Fittings
Application
 Complete range of Spears Brands Schedule 40 PVC fittings used in
irrigation watering systems.
Features:
- Smooth interior walls result in lower pressure loss and higher
volume than metal fittings.
- Schedule 40 size range 15mm - 250mm Metric
| Properties |
ASTM Test
Method |
PVC |
| Mechanical Properties, 23°C |
| Specific Gravity, g/cm³ |
D 792 |
1.41 |
| Tensile Strength, psi |
D 792 |
7000 |
| Modulus of Elasticity, psi |
D 792 |
440000 |
| Compressive Strength, psi |
D 792 |
9000 |
| Flexural Strength, psi |
D 792 |
13200 |
| Izod Impact, notched, ft-lp/in |
D 792 |
0.65 |
| Thermal Properties |
| Heat Deflection Temperature, 0°C at 455kPa |
D 792 |
165 |
| Thermal Conductivity, BTU/hr/sq ft/°F/in |
D 792 |
1.2 |
| Coefficient of Linear Expansion, in/in/°F |
D 792 |
3.0 x 10-5 |
| Flammability |
| Limiting Oxygen Index, % |
D 792 |
43 |
| UL 94 Rating |
94V-0 |
| Other Properties |
| Water Absorption, % 24 hr. |
D 792 |
0.05 |
| Industry Standard Colour |
White / Dark Grey |
| ASTM Cell Classification |
D 1784 |
12454 |
| NSF Potable Water Approved |
Yes |
Selection of 35 Categories
See HR Products Price list for sizes and codes
Not for use with compressed air or gases
Quick-Fix Repair Couplings
Application
 Excellent for use in repairing broken lines or adding additional lines.
Simply cut section of broken pipe slightly longer than compressed
Quick-Fix, apply glue to fittings and expand Quick-Fix to fill the gap.
Specifications:
- Available in 15-150mm sizes.
- Rugged Hi-Impact PVC Sch 40 Type II construction.
- 1033kPa rated in all positions.
- Internal self-lubricating EPDM oʼring for long life and smooth
movement.
- One piece cylinder - no solvent welds to leak.
Flo Compression Male Adaptor
Application
 Used in PVC Pipe networks carrying water.
Specifications:
- PVC Type 1, Grade 1, Cell Class 12545-B
- EDPM - 'O' Ring Seal
- Pressure control ring - PVC
- Stainless Steel grip ring
- ACME Thread cap to body
- Maximum pressure - 1102kPa
- Stainless Steel collar
* Do not use on gas, oil and compressed air.
Flo Compression Couplings
Application
 Repair coupling used in PVC Pipe Networks carrying
water.
Specifications:
- Material - PVC Type 1, Grade 1, Cell Class 12545-B
- BYNA-N Seals - Double Width
- ACME Thread cap to body
- Maximum pressure - 1378kPa
* Do not use on gas, oil and compressed air.
Flo Compression Tees
Application
 Used to allow the addition of a tee branch in PVC Pipe Network
carrying water.
Specifications:
- Material - PVC Type 1, Grade 1, Cell Class 12545-B
- BYNA-N Seals - Double Width
- ACME Thread cap to body
- Maximum pressure - 1378kPa
- 15mm to 50mm sizing
* Do not use on gas, oil and compressed air.
Flo Span Repair Couplings
Application
Excellent for use in repairing broken lines or adding additional
lines. Simply cut section of broken pipe slightly longer than
compressed Flo Span, apply glue to fitting and expand Flo Span
to fill the gap.
Specifications:
 Double 'O' Ring design on expansion (EDPM)- ACME Thread cap to body
- 1378kPa rated in all positions
- EDPM 'O' Ring on union end
- Body: PVC Type 1, Grade 1 material
- 15mm to 100mm sizing
* Do not use on gas, oil and compressed air.
Spears Van Stone Flanges
Application
 Designed for use for joining plastic piping systems, where frequent
disassembly may be required. Suitability of application is at the
discretion of the user.
Features:
- Two piece design with rotating ring flange face
- Dual bolt hole pattern
- PVC construction
- No backing ring required
Specifications:
- 80 - 250mm metric sizing
- Bolt hole pattern
- Suits BS10 Table D & E (Aust)
- Suits ANSI (USA)
- Suits DIN (Europe)
- PVC Cell classification 12454-B
- Maximum pressure 1033kPa at 22° Celcius
One Piece Flanges
Application
 Designed for use in joining plastic piping systems where frequent
disassembly may be required. Suitability of application is at the
discretion of the user.
Features
- Single body
- PVC construction, heavy body
- Table D drilling
Specifications:
- 50 - 150mm metric sizing
- Bolt hole pattern AS/NZS 1477
- Maximum pressure 1033kPa at 25º Celcius
Kwikcut
Description:
Kwikcut is a Plastic Pipe and Hose Cutter designed to meet the needs of the professional.
Application:
 The rotating / rocking technique produces fast, easy cuts, together with being small and lightweight,
saves hours of time and effort. It is ideally suited to a limited working space, the cutter adapts easily
where a conventional hacksaw cannot be used. Kwikcut produces no cutting residue, eliminating
deburring and the possibility of contaminating the pipe. This clean, smooth cut allows quick and
easy connections for a neat, professional installation.
Features:
- Replaceable high-carbon, Teflon coated steel blade.
- Blade closes into its own handle for safe carrying and handling.
- Tough, durable nylon handles.
- Tool pouch available.
|
|
