Gold Coast Sprinkler And Pumping Centre is proud to be able to provide patio drip irigation kits, sprinkler systems, agricultural irrigation, sprinklers, water pumps, dirty water pumps, ponds, fountains, water tanks, sprinkler system design, hunter irrigation products.
For a more complete list of products please visit the products pages found here, or utilise the provided links below. |
|
Hunter Fixed Pattern Nozzles
 When we spray sprinklers are used in irrigation systems, fast and easy
installation are two of the most important concerns for the installer. Both of
those concerns are put at ease when the choice is a Hunter Fixed Pattern
nozzle. While there are many landscapes that require precise fine-tuning
to achieve the optimum coverage, the vast majority of spray heads that install call for the use of standard angle nozzles...that is, full-circle
half-circle and quarter-circle patterns. When installing nozzles
along straight runs or in areas that require 360º arcs, labour will be saved
by not having to adjust each nozzle to those common patterns. With
patterns that feature precise edges, Hunter Fixed Pattern nozzles
have been painstakingly designed to provide superior coverage and
minimize wind drift. Eight different radius ranges are available, each
able to be reduced if needed for fine-tuning and each colour-coded for
quick and easy radius identification.
Full, Even Coverage Across Every Pattern
Every Hunter Fixed Pattern Nozzle has been precision engineered to ensure that the entire area of
coverage receives its intended amount of water. Whether it is a quarter-, half- or full-circle pattern,
the discharge from the nozzle features a consistent trajectory from all sides, which assures delivery
at the same high level of performance in every direction. Hunter nozzles also are noted for emitting
the optimum droplet size: large enough to avoid the problems of misting, small enough to provide
nice, even distribution.
Hunter Adjustable Arc Nozzles
Any spray head body that uses female-threaded nozzles can have the ultimate in
versatility with a aHunter nozzle. And the most versatile of the wide array
of hunter nozlles is the Adjustable Arc nozzle. With an easy turn by hand
- no tools for 25 to 360 degrees to keep the spray in the areas as designed.
In addition, the radius can be reduced up to 25% without changing the pattern
distribution. Thus, virtually any landscape needs can be met, including
those areas that require custom arcs. Today, more and more landscapes are
calling for a nozzle that can be precisely set to handle meandering walkways
or atypical, hard-to-handle sharp angles. Why keep an inventory of
the many different odd arc nozzles that you would seldom use? When
you stock Hunter Adjustable Arc nozzles, you'll always have just the
right nozzle...no matter what the job is.
The Ideal Solution for Curving Landscapes
Most nozzles have been designed specifically to provide optimum efficiency at the standard angles
of 90, 180 and 360 degrees. And while most expanses of turf call for the use of such nozzles, today
more and more landscapes are requiring a nozzle that can deliver effective coverage to sites whose
plot plans don't fall into these standard angles. Irregularly shaped planter beds and meandering
walkways create landscapes with odd angles that are in need of an irrigation solution that can
provide effective coverage. Hunter Adjustable Arc nozzles can be set at any angle from 25 to 360 degrees, allowing sprinklers to be fine-tuned to exactly the precise pattern needed. You'll never
need worry about having to much coverage (eliminating the wasted water that would normally end
up overshooting your lawn and land on the sidewalk) or too little (no more dry spots for those few
extra degrees of grass that other nozzles can't quite reach). Best of all, no tools are required to adjust
the arc, it's all done easily by hand.
Hunter Specialty Nozzles
 Pop-up Micro Spray Nozzles
The unique pop-up design of the Hunter Micro-Spray
Nozzle, coupled with the fact that it attaches directly to a
pop-up sprinkler, makes this alternative to drip a winner.
When not in use, both the nozzle and spray head body
retract, so nothing sticks up above the surface.
Short Radius Nozzles
 Hunter Short Radius Nozzles permit well-controlled
easy watering of planter boxes and bed areas. These
nozzles (in 2-, 4-, and 6-foot radius versions) are just
the answer for small spaces that have longed for a
better solution than trying to drastically reduce the
radius range on a nozzle designed for longer throws.
Hunter Specialty Nozzles
Strip Pattern Nozzles
To accomodate the needs of the long narrow
planting strips, Hunter has the industry's first
left and right 1.5 x 4.6m corner strip nozzles,
and a 1.5 x 9.1m side strip nozzle. All three
nozzles can be adjusted down 25% without the
loss of efficient pattern distribution.
Stream Spray Nozzles - S-8A and S-16A
Combining the convenience of customised arc
selection and a lower appliction rate, this dial-setting,
adjustable arc nozzle offers a stream spray that throws
as far out as 5.5m at 276kPA. An outstanding nozzle
to use on slopes and ground cover areas with tight
soils that require a low precipitation rate.
Hunter Bubblers & Bubbler Nozzles
Application
Hunter presents a way to meet your deep watering needs that offers considerably more efficiency
than drip irrigation. With the ability to compensate for pressure differences, the Hunter PCB (and
PCN, which attaches directly to pop-up spray bodies) allows the output of water to remain constant
regardless of the input pressure, resulting in a precise application never before achieved in bubblers.
The same holds true with the MSBN and 5-CST-B nozzles, designed for deep watering of larger
planted areas. Now, every plant, shrub or tree can receive the same amount of water required with
no excess runoff or waste. Best of all, because it's so simple to install, you'll have the perfect
alternative to drip...no fancy filtration, no unsighlty above-ground tubes, and considerably less
chance of damage. For a more attractive, more efficient way to deep water, let the idea of Hunter's
bubbler products to sink in.
 With the pressure compensating nozzle (PCN), you get all
the advantages over traditional drip irrigation plus a product
that sits atop a riser that retracts into the ground when not
in use. It's the most tamper proof, eye appealing method of
deep watering available today (attention specifiers...you're
going to like this).
 Four different PCB models means that you can choose from colourcoded flow rates of either 0.91, 1.91, 3.81 or 7.61 litres per minute
to eliminate guesswork and guarantee that all your greenery gets
exactly the water it needs. Or choose the AFB model which pressure compensates to a 7.61 LPM flow and can be fine-tuned with a
stainless steel screw adjustment.
Hunter Multi Stream Bubbler
Application
 A Hunter exclusive! Four streams on the half-circle, eight streams
on the full-circle discharge water to more effectively cover a large
area needed in many planted zones. And because it installs on a
pop-up sprinkler, the bubbler retracts when not irrigating, which
prevents damage (used on a 12' pop-up, the sprinkler will clear the
plants).
|
|
